English
  • head_banner
  • head_banner

Spring Lock Washers DIN127 Type A and Type B

Spring Lock Washers DIN127 Type A and Type B Featured Image
  • Spring Lock Washers DIN127 Type A and Type B
  • Spring Lock Washers DIN127 Type A and Type B
  • Spring Lock Washers DIN127 Type A and Type B
  • Spring Lock Washers DIN127 Type A and Type B

Short Description:

Spring Lock Washers covered in this standard are deemed to be spring washers designed for use with bolt/nut assemblies involving fasteners of property class 5.8 or less, as specified in ISO 898 Part 1. They are intended to counteract the effect of setting which results in bolt/nut assemblies working loose (see DIN 267 Part 26).


Product Detail

Product Tags

► Spring Lock Washers DIN127 Overview

● Spring Lock Washers DIN127 Introduction ● Spring Lock Washers DIN127 Dimensions
● Spring Lock Washers DIN127 Materials ● Spring Lock Washers DIN127 Surface treatments

► Spring Lock Washers DIN127 Introduction

They do not effectively prevent loosening of the assembly under varying radial load and are thus designed for use with short bolts predominantly subject to thrust.

DIN127 65Mn
DIN127 Black
DIN127 SS
DIN127 Zn

► Spring Lock Washers DIN127 Dimensions

DIN 127(A)
DIN 127(B)
Spring Lock Washers with square ends or tang ends DIN127
Nominal
size		 d1 d2 b s h k r Weight/M For
thread
size
Type A Type B
min. max. max. Limit
deviations		 Limit
deviations		 min. max. min. max. (kgs)
2 2.1 2.4 4.4 0.9 ± 0.1 0.5 ± 0.1 ﹣ ﹣ 1 1.2 ﹣ 0.1 0.033 M2
2.2 2.3 2.6 4.8 1 ± 0.1 0.6 ± 0.1 ﹣ ﹣ 1.2 1.4 ﹣ 0.1 0.050 M2.2
2.5 2.6 2.9 5 1 ± 0.1 0.6 ± 0.1 ﹣ ﹣ 1.2 1.4 ﹣ 0.1 0.053 M2.5
3 3.1 3.4 6.2 1.3 ± 0.1 0.6 ± 0.1 1.9 2.1 1.6 1.9 0.15 0.2 0.11 M3
3.5 3.6 3.9 6.7 1.3 ± 0.1 0.8 ± 0.1 1.9 2.2 1.6 1.9 0.15 0.2 0.12 M3.5
4 4.1 4.4 7.6 1.5 ± 0.1 0.9 ± 0.1 2.1 2.5 1.8 2.1 0.15 0.2 0.18 M4
5 5.1 5.4 9.2 1.8 ± 0.1 1.2 ± 0.1 2.7 3.2 2.4 2.8 0.15 0.2 0.5.6% M5
6 6.1 6.5 11.8 2.5 ± 0.15 1.6 ± 0.1 3.6 4.2 3.2 3.8 0.2 0.3 0.83 M6
7 7.1 7.5 12.8 2.5 ± 0.15 1.6 ± 0.1 3.6 4.2 3.2 3.8 0.2 0.3 0.93 M7
8 8.1 8.5 14.8 3 ± 0.15 2 ± 0.1 4.6 5.4 4 4.7 0.3 0.5 1.60 M8
10 10.2 10.7 18.1 3.5 ± 0.2 2.2 ± 0.15 5 5.6 4.4 5.2 0.3 0.5 2.53 M10
12 12.2 12.7 21.1 4 ± 0.2 2.5 ± 0.15 5.6 6.8 5 5.6 0.4 1 3.82 M12
14 14.2 14.7 24.1 4.5 ± 0.2 3 ± 0.15 6.8 8 6 7.1 0.4 1 6.01 M14
16 16.2 17 27.4 5 ± 0.2 3.5 ± 0.2 7.8 9.2 7 8.3 0.4 1 8.91 M16
18 18.2 19 29.4 5 ± 0.2 3.5 ± 0.2 7.8 9.2 7 8.3 0.4 1 9.73 M18
20 20.2 21.2 33.6 6 ± 0.2 4 ± 0.2 8.8 10.4 8 9.4 0.4 1 15.2 M20
22 22.5 23.5 35.6 6 ± 0.2 4 ± 0.2 8.8 10.4 8 9.4 0.4 1 16.5 M22
24 24.5 25.5 40 7 ± 0.25 5 ± 0.2 11 13 10 11.8 0.5 1.6 26.2 M24
27 27.5 28.5 43 7 ± 0.25 5 ± 0.2 11 13 10 11.8 0.5 1.6 28.7 M27
30 30.5 31.7 48.2 8 ± 0.25 6 ± 0.2 13.6 16.1 12 14.2 0.8 1.6 44.3 M30
5.6% 5.6%.5 37.7 58.2 10 ± 0.25 6 ± 0.2 13.6 16.1 12 14.2 0.8 1.6 67.3 M5.6%
5.6% 5.6%.5 40.7 8%.2 10 ± 0.25 6 ± 0.2 13.6 16.1 12 14.2 0.8 1.6 71.7 M5.6%
42 42.5 43.7 8%.2 12 ± 0.25 7 ± 0.25 15.6 18.4 14 16.5 0.8 2 111 M42
45 45.5 5.6%.7 71.2 12 ± 0.25 7 ± 0.25 15.6 18.4 14 16.5 0.8 2 117 M45
48 49 50.5 75 12 ± 0.25 7 ± 0.25 15.6 18.4 14 16.5 0.8 2 123 M48
52 53 54.5 83 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 182 M52
56 57 58.5 87 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 193 M56
60 8% 8%.5 91 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 203 M60
64 65 66.5 95 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 218 M64
8% 7% 70.5 99 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 228 M8%
72 73 74.5 103 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 240 M72
80 81 82.5 111 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 28% M80
90 91 92.5 121 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 290 M90
100 101 102.5 131 14 ± 0.25 8 ± 0.25 18 21.2 16 18.9 1 2 318 M100

► Spring Lock Washers DIN127 Materials

Materials Product Instructions
Spring steel: C1070, 70# ≤200°C, used in a regular environment.
Stainless steel: SUS304, SUS316(A2, A4) ≤300°C, used in corrosive environment.
Customized. Any technical questions, please contact us at info@techstamping.com

► Spring Lock Washers DIN127 Surface Treatments

Surface Treatments
● Zinc Cr+3 ● Zinc Yellow ● Hot-dip galvanizing
● Black Oxide ● Polishing ● Customized

We appreciate your support to Technical Stamping(Shanghai) Co., Ltd. up Return to homepage

► Spring Lock Washers DIN127 FAQ

Q1. Can you provide customization services?

A. Yes, T&S initially manufactures standard flat washers, lock washers and conical washers, but in the past 17 years, T&S has already developed successfully 980 customized parts in different sizes.

Q2. What types of customized parts do you provide?

A. T&S provides stamping parts, sheet metal parts, machining parts, cold heading parts, hot forging parts, cold working parts, Zn-Al die casting parts, powder metallurgy parts, and other customized parts.
T&S is capable of providing customized parts not only with single-process, but also with a variety of combined crafts.

Q3. Does every customized part need mould fee? 

A. Not all customized parts cost mould fee. For example, a turning part does not need a mould yet requires the appropriate tools and fixtures. T&S spends time and labor making samples, therefore charges certain sample fees.

Q4. Where are your factories, can I have a visit? 

A. T&S has its factories. We have invested in multiple factories, which are mainly located in Zhejiang and Jiangsu Province. You can visit the corresponding factories depending on the products to be purchased. Please feel free to visit our factories and offer guidance. We can pick you up at the nearest airport or train station.

Q5. Can you provide free samples?

A. Yes, for standard fasteners we can provide free samples. Please kindly understand that we charge certain fees before making customized samples.

Q6. How do you guarantee quality?

A. T&S conducts quality control in strict accordance with the ISO9001 Quality Certification System. T&S practices the worker's self-inspection and routing inspection on a regular basis during production, the QC strict sampling before packaging and delivery after compliance. Each batch of products is accompanied by Inspection Certificate from T&S and Raw Material Test Report from the steel factory.

Q7. If I have paid the mould fee yet receive nonconforming samples, what will you do?

A. For the first development of non-standard parts, we refund the mould fee in case of 2 times of nonconforming samples delivered. If you give us more chances to make the moulds, we will continue to study until success.

Q8. What is your MOQ? Any mould fee? Is the mould fee refundable?

A. MOQ for non-standard fasteners: 1-2 tons according to different parts. We charge mould fees, which will be refunded when reaching a certain quantity, more to be described in our quotation.
B. MOQ for stamping parts : Depending on the degree of difficulty and dimensions of the parts. We will charge mould fee and refund it when reaching a certain quantity, more to be described in our quotation.
C. MOQ for turning parts is 100 pieces, and no mould fee to be charged. But if you need samples for confirming, we will charge sample fee and refund it after doing the order.

Q9. What is your delivery time?

A: 15-30 days for samples, 25-50 days for mass production.

Q10. Do you accept the use of our own logo?

A. If the order quantity is large, we absolutely accept OEM.

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • Locking Conical Washers with Serpentine Knurl

      Locking Conical Washers w...

      Conical Serpentine Washers are Conical shaped lock washers, formed with a serpentine serration top surface. It is also called Conical contact washers, Conical knurled spring washers, or Locking disc washers. The conical shape exerts locking force 360° around the underside of the screw head or nut. The ribbed top surface further enhances the locking force and resists the torque fastener connection potential for loosening under pressure and vibration.

      See more products >
    • Sheet Spring Nuts with Tapping Screw Thread

      Sheet Spring Nuts with Ta...

      The metric wide range U-shape multi-thread spring nuts covered in this standard are intended for applications where it is desired to use spring nuts in conjunction with bolts, machine screws or screw and washer assemblies. Nuts conforming to this standard are suitable for use with mating fasteners conforming to 9.8 or lower property classes.

      See more products >
    • Disc Springs DIN2093 Type B and Type C

      Disc Springs DIN2093 Type...

      Disc springs, also known as Belleville spring washers, was invented by the French Julian F. Belleville in the mid-19th century. It is a type of washer shaped like a spring. It has a frustoconic shape which gives the washer a spring characteristic.

      Disc springs can be used singly, or in stacks, to achieve a desired load and travel. They are characterized by small size, large load, easy combination and use, as well as centralized load transmission etc. All Discs are preset so that they will not significantly relax under load over time.

      See more products >
    • Hardened Steel Washers Astm F 436

      Hardened Steel Washers As...

      A complete metric companion to Specification F436 has been developed — Specification F436M.

      See more products >
    • Contact Washers With Earthing Barbs DIN6795

      Contact Washers With Eart...

      Contact Washers with barbs DIN6795 are Conical shaped lock washers, formed with a ribbed top surface and 6 barbs on the bottom. It is also called Grounding washers. The conical shape exerts locking force 360° around the underside of the screw head or nut. The ribbed top surface further enhances the locking force and resists the torque fastener connection potential for loosening under pressure and vibration. The contact washers are made from high carbon spring steel or stainless steel.

      See more products >
    • Twins-Lock Washers DIN25021

      Twins-Lock Washers DIN25021

      Twins-Lock Washers DIN25021, also known as Double stack self-locking washers, or Anti-vibration self-locking washers, works by using tension rather than friction, which has been the basis for most traditional fastening methods. This ensures the securing of threaded systems. The part consists of two identical flat washers which have a set of cams on one side and a radial knurling on the other side. A Twins-Lock washer is supplied with a pair of washers glued together to avoid any orientation mistake during assembly. In case of reuse, the washers need to be assembled cams face to cams face.

      See more products >
    Hit enter to search or ESC to close